Causes and Classification of Laser Cladding Cracks

Jul 21, 2025 Leave a message

​Causes and Classification of Laser Cladding Cracks

 

 

As an advanced surface modification and repair technology, laser cladding is widely used in aerospace, machinery manufacturing and other fields. However, the occurrence of cracks has become a key issue restricting its further development. These cracks not only reduce the mechanical properties and service life of cladded parts, but may also lead to serious safety hazards. Therefore, in-depth exploration of the causes of laser cladding cracks and clarification of their classification and characteristics are of great significance for improving the practicality of laser cladding technology.

 

info-1536-864

Temperature Stress Factors for Crack Generation

​

In the laser cladding process, the high-energy laser beam rapidly heats the substrate surface to above 10⁵K at an ultra-high heating rate of 10⁶-10⁷ K/s, and then rapidly cools it through inert gases such as argon. This sharp temperature change causes a huge temperature gradient between the cladding layer and the substrate. During cooling, the volume changes of the two are inconsistent, leading to mutual restraint and the formation of stress. When the stress exceeds the yield limit of the cladding layer, cracks will be initiated, which is the main defect restricting the application of laser cladding technology.

Microstructure and Segregation Factors for Crack Generation

 

During the growth of eutectic structures and coarse dendrites at the bottom of the laser cladding layer, intergranular weakening will occur due to dendritic segregation. This microstructural defect makes it easy for cracks to initiate and propagate along grain boundaries, further increasing the possibility of crack generation. The combined effect of uneven microstructure and element segregation becomes an important inducement for crack initiation.

info-1536-864

 

info-1369-775

Classification and Characteristics of Cracks

​

Laser cladding cracks can be mainly divided into three categories. Cladding layer cracks are generated during the solidification process of molten metal, mostly formed on the surface or inside the cladding layer and propagating towards the substrate; interface cracks are induced by defects such as pores and inclusions, originating at the interface between the cladding layer and the substrate and gradually propagating towards the surface; scanning overlap zone cracks are formed because molten metal cannot be fully wetted, mainly appearing at the junction of the overlap joint and the substrate. The differences in the generation mechanism and distribution area of different types of cracks provide a basis for targeted problem-solving.

 
Core Components of laser Cladding System
 
info-600-600
Laser cladding Head
info-600-600
fiber laser machine
info-600-600
powder feeder
info-600-600
laser water chiller

 

In Summary

 

The generation of laser cladding cracks is influenced by both temperature stress and microstructure and segregation factors, and these cracks exhibit different characteristics in terms of their classification. A clear understanding of these causes and classification features lays a solid foundation for formulating effective crack inhibition strategies in subsequent practices.